The 12 Step Carpet Cleaning Process
• Step 1: Pre-Inspection
Our Technician will do a walk through inspection with you to identify soiling conditions, carpet construction, and potential permanent stains.
•Step 2: Pre-vacuum
Your carpet is pre-vacuumed with a commercial vacuum to remove bonded, insoluble dry soil.
•Step 3: Furniture Moving
Sofas, chairs and tables will be carefully moved. Larger pieces, such as beds and dressers are left in place under our regular pricing structure. Furniture will be protected with disposable blocks and tabs.
•Step 4: Pre-Spot
Certain spots are pre-treated for maximum removal.
•Step 5: Pre-spray
Traffic areas are pre-treated with a biodegradable traffic lane treatment.
•Step 6: Pre-Groom
Your carpet will be pre-groomed with a carpet groomer or rotary cleaning machine (depending on soil level) to further loosen traffic area soil.
•Step 7: Extract and Rinse
Once the soil has been loosened, our state-of-the-art truck-mounted hot water extraction cleaning process will thoroughly flush the carpet pile. Pressure and heat are regulated to prevent the carpet from being over-wet.
•Step 8: Neutralizer
The pH is balanced on every carpet and fabric cleaned. This is one of the most important steps according to the manufacturers of carpet. It is accomplished during the extract & rinse process or a post spray will be applied.
•Step 9: Post Spot Treatment
Potential permanent stains, as identified by the technician, may not be removed.
•Step 10: Post Groom
The Carpet pile is set in one direction to aid the drying process.
•Step 11: Speed Dry
High velocity air movers are placed on the carpet to lessen the drying time.
•Step 12: Post Cleaning Inspection
Our technician will walk through your home with you to point out the cleaning results and make sure that you are completely thrilled with the job.
WE CHARGE BY THE "CLEANABLE SQUARE FOOT" FOR CARPET CLEANING.
